HJF3000U
HJF3000U| SPECIFICATION | HJF3000U | |||
| A | B | C | ||
| INJECTION UNIT | ||||
| Screw Diameter | mm | 180 | 210 | 220 |
| Screw L/D Ration | L/D | 24 | 24 | 22.9 |
| Shot Size(Theoretical) | cm3 | 29390 | 40003 | 43904 |
| Injection Weight(PS) | g | 26745 | 36402 | 39953 |
| Injection Rate | g/s | 1468 | 2000 | 2200 |
| Injection Pressure | MPa | 210 | 155 | 141 |
| Screw Speed | rpm | 50 | ||
| CLAMPING UNIT | ||||
| Clamp tonnage | KN | 30000 | ||
| Opening stroke | mm | 2000 | ||
| Space Between Tie Bars | mm | 1900*1750 | ||
| Max.Mold Height | mm | 1900 | ||
| Min.Mold Height | mm | 1000 | ||
| Ejector Stroke | mm | 450 | ||
| Ejector Tonnage | KN | 565 | ||
| OTHERS | ||||
| Max.Pump Pressure | MPa | 16 | ||
| Pump Motor Power | KW | 55+55+55+55 | ||
| Heater Power | KW | 177 | ||
| Machine Dimension(L*W*H) | m | 22.00*5.50*5.00 | ||
| Machine Weight | t | 220 | ||
| Oil Tank Capacity | L | 4500 | ||
| Platen Dimensions Face |  | |||
| Mold space Dimensions |  | |||
| Machine Dimensions |  | |||
