HJ180U
HJ180U| SPECIFICATION | HJ180U | ||
| A | B | ||
| INJECTION UNIT | |||
| Screw Diameter | mm | 50 | 55 |
| Shot Size(Theoretical) | cm3 | 420 | 480 |
| Injection Weight(PS) | g/(g) | 460 | 525 |
| Injection Pressure | MPa | 159 | 140 |
| Injection Rate | g/s | 128 | 158 |
| Plasticizing Capacity | g/s | 20 | 24 |
| CLAMPING UNIT | |||
| Clamp tonnage | KN | 1800 | |
| Opening stroke | mm | 430 | |
| mold height | mm | 130-450 | |
| Space Between Tie Bars | mm | 470*470 | |
| Ejector Stroke | mm | 130 | |
| Ejector Tonnage | KN | 45 | |
| OTHERS | |||
| Max.Pump Pressure | MPa | 16 | |
| Pump Motor Power | KW | 15 | |
| Heater Power | KW | 6 | |
| Machine Dimension(L*W*H) | m | 5.1*1.2*1.7 | |
| Machine Weight | t | 5 | |
| Hopper Capacity | L | 240 | |
| Oil Tank Capacity | L | 310 | |
