HJ280U
HJ280U| SPECIFICATION | HJ280U | ||
| A | B | ||
| INJECTION UNIT | |||
| Screw Diameter | mm | 60 | 65 |
| Shot Size(Theoretical) | cm3 | 870 | 990 |
| Injection Weight(PS) | g/(g) | 950 | 1050 |
| Injection Pressure | MPa | 183 | 157 |
| Injection Rate | g/s | 240 | 270 |
| Plasticizing Capacity | g/s | 31 | 34 |
| CLAMPING UNIT | |||
| Clamp tonnage | KN | 2800 | |
| Opening stroke | mm | 540 | |
| mold height | mm | 170-550 | |
| Space Between Tie Bars | mm | 580*580 | |
| Ejector Stroke | mm | 145 | |
| Ejector Tonnage | KN | 75 | |
| OTHERS | |||
| Max.Pump Pressure | MPa | 16 | |
| Pump Motor Power | KW | 22 | |
| Heater Power | KW | 6 | |
| Machine Dimension(L*W*H) | m | 6*1.6*2.1 | |
| Machine Weight | t | 8.1 | |
| Hopper Capacity | L | 570 | |
| Oil Tank Capacity | L | 420 | |
