HJK100
HJK100| SPECIFICATION | HJK100 | ||
| A | B | ||
| INJECTION UNIT | |||
| Screw Diameter | mm | 35 | 38 |
| Screw La/D Ration | L/D | 20.1 | 18.5 |
| Shot Size(Theoretical) | cm3 | 135 | 158 |
| Injection Weight(PS) | g | 123 | 144 |
| Injection Rate | g/s | 76 | 90 |
| Injection Pressure | MPa | 237 | 201 |
| Screw Speed | rpm | 0-220 | |
| CLAMPING UNIT | |||
| Clamp tonnage | KN | 1000 | |
| Opening stroke | mm | 305 | |
| Space Between Tie Bars | mm | 355*315 | |
| Max.Mold Height | mm | 320 | |
| Min.Mold Height | mm | 150 | |
| Ejector Stroke | mm | 70 | |
| Ejector Tonnage | KN | 27 | |
| OTHERS | |||
| Max.Pump Pressure | MPa | 16 | |
| Pump Motor Power | KW | 11 | |
| Heater Power | KW | 5.3 | |
| Machine Dimension(L*W*H) | m | 3.58*1.25*1.65 | |
| Machine Weight | t | 2.7 | |
| Oil Tank Capacity | L | 210 | |
| Platen Dimensions Face |  | ||
| Mold space Dimensions |
| ||
| Machine Dimensions |
| ||
