| | |


News

plastic moulder

time:2016-01-20 16:02:33 From: haijiangjixie

  

 plastic moulder

Clamping:

Ø  Five-hinge double-toggle locking mechanism;

Ø  Motions of three box-shaped platens are simulated and optimum designed by computer;

Ø  Mechanic adjustable supporting system for the movable platen to protect tie bar and extend its service life;

Ø  Double safeguards (mechanic & electric) with sensitive low pressure mold protection function;

Ø  Long distance from enclosing guard to platen center is geared to installation of large molds;

Ø  Whole-covered enclosing guard painted with spray powder on surface for fine durability.

Injection:

Ø  Balanced double-cylinder injection & twin-guide support system;

Ø  One-line hydraulic screw drive motor & single-cylinder injection forward device;

Ø  Quality alloy nitriding steel screw and nitralloy barrel;

Ø  Ultra high/low temperature melt alarm for barrel;

Ø  Separable structure of screw and barrel for plastic assembly with each machine size matching three different-diameter screws;

Hydraulic:

Ø  Excellent imported hydraulic components with good response time;

Ø  System Oil pressure is designed to be 16Mpa;

Ø  Pressure flow is proportionally controlled with ultra high speed clamping;

Ø  Standard core-out/in device, optional hydraulic guard, core-out/in as mold open and accumulator injection unit;

Ø  Design of cartridge valve for medium/large machines to improve response speed, sensitivity and reliability. 

Electric:

Ø  Dedicated controller from Taiwan Techmation, and Samsung or Siemens controller is available as per customers’ need;

Ø  CPU controlled to promote the speed of controller as well as running precision;

Ø  PID programmed barrel heating system with static control precision reaching 0.5C;

Ø  Linear position transducer is available for ejection/clamping/injection motion control with precision within 0.01mm;

Ø  High antistatic and anti-jamming electric cabinet structure to greatly strengthen the reliability and stability of controller.

Machine seat:

Ø  Square steel structure integrating injection unit and clamping part to keep machine stable and tight;

Ø  Reasonable oil circuit layout to locate pump and valve board outside of the machine seat as as possible for the convenience of installation and maintenance;

Ø  Intensified rigidity at the place where the motor is installed, with rubber layer to minimize vibration of electric cabinet, heat transfer and machine noise.

 

 

 

 

 

 

 

 

 

 

   SPECIFICATION

HJF1000MT

A

B

C

D

INJECTION UNIT

Screw Diameter

mm

90

100

110

115

Screw L/D Ration

L/D

25.5

23

20.9

20

Shot Size(Theoretical)

cm3

2920

3610

4369

4778

Injection Weight(PS)

g

2670

3300

3980

4325

Injection Rate

g/s

580

717

867

948

Injection Pressure

MPa

216

176

146

133

Screw Speed

rpm

100

CLAMPING UNIT

Clamp tonnage

KN

10000

Opening stroke

mm

1000

Space Between Tie Bars

mm

1100*1000

Max.Mold Height

mm

1100

Min.Mold Height

mm

400

Ejector Stroke

mm

325

Ejector Tonnage

KN

345

OTHERS

Max.Pump Pressure

MPa

16

Pump Motor Power

KW

37+45

Heater Power

KW

59

Machine Dimension(L*W*H)

m

12.1*2.64*3.00

Machine Weight

t

53

Oil Tank Capacity

L

1700

Platen Dimensions Face

 

Mold space Dimensions

Machine Dimensions

 plastic moulder

Tel : 0574-88233242    Fax : 0574-88396095    Email : sales@china-haijiang.com
Address :Tongyi Industrial Zone Dongwu Town Yinzhou District Ningbo City(Near BaoZhan Highway)
Copyright @ NING BO HAI JIANG MACHINERY MANUFACTURING CO.,LTD., ( 浙ICP备19026541号-1)Technical support: 谷歌推广&bossgoo BOSSGOO MALL Link