| | |


News

Rubber injection molding machine nozzle with a self-locking

time:2018-07-16 09:33:53 From: Sundy

 

Rubber injection molding machine nozzle with a self-locking

When rubber injection molding machine in production, use good mobility plastic nozzle prone plastic salivation, drooling is not only a waste of such material will also affect the quality of products, even interrupting production. To solve the problem of plastic salivation, existing common solution is to use the first three self-locking spring nozzle; the second is the use of a hydraulic control device to control the nozzle switch; the third is to reduce the nozzle aperture .Extrusion die should pay attention to the four items - Injec

For the first solution, since the spring lock nozzle has the advantage of cheap and widely used, but due to the large pressure loss, when converting liquidity fair or poor materials to replace the nozzle, while the spring at high temperatures prone to failure, it is generally a year and would replace a nozzle, and the current domestic spring up on the performance is not to IJ, often imported, high maintenance costs. For the second solution, using the hydraulic control device to control the nozzle switch is better, but the cost is too high and must install the appropriate software to control the rubber injection molding machine and therefore not widely used. For the third solution, reducing the nozzle aperture prone to gag, but rubber injection molding machine is difficult to completely prevent salivation, different injection materials still need to replace the corresponding nozzle.

sundy 

Tel : 0574-88233242    Fax : 0574-88396095    Email : sales@china-haijiang.com
Address :Tongyi Industrial Zone Dongwu Town Yinzhou District Ningbo City(Near BaoZhan Highway)
Copyright @ NING BO HAI JIANG MACHINERY MANUFACTURING CO.,LTD., Technical support: netcec&bossgoo Link