Preparation for Injection Molding Machine Purchase

1. How to purchase an injection molding machine? How to decide machine’s specifications?
1.1 Work out the injection capacity required for the injection molding machine according to the weight of injection molded products?
(1) When the injection molded products are made from polystyrene, the injection capacity required for the machine is Wps.
Wps = (Product weight + total weight of gating system) / (0.75~0.9)
Or Wps = (1.3 ~ 1.1) x (Product weight + total weight of gating system)
(2) When the products are made from other plastics (denominated as plastic X), first work out the theoretical injection capacity of such kind plastic Wx required for the machine by following the above method.
Wx = (1.3 ~ 1.1) x (Product weight + total weight of gating system)
However, the injection capacity of the machine cannot be simply decided by Wx. Instead, it should be converted into Wps value. The conversion formula is:
Wps=1.05 x W/p
Where p is the specific gravity of a certain kind of plastic.

1.2 According to the vertical projectied area of the injection molded products on the die plate (first plate or second plate), work out the mold locking force P:
Mold locking force = mold locking force constant x projectied area of product
Viz. P=Kp x s
Where P is the mold locking force (t); S is the vertical projectied area of the product on the die plate (cm2), and Kp is the mold locking force constant (t/cm2). Kp values are listed in the following table (Table 5)
Table 5 Mold Locking Force Constant Kp
(for comparatively precise injection molded products)
Plastic Description | PS | PE | PP | ABS | Nylon | Acegal | Glass Fiber | Other Engineering Plastics |
Kp (t/cm2) | 0.32 | 0.32 | 0.32 | 0.30~0.48 | 0.64~0.72 | 0.64~0.72 | 0.64~0.72 | 0.64~0.72 |
1.3 According to the outside contour size of mold, decide the internal space between the tie bars (guide posts) of the injection molding machine and the latter should be bigger than the former.

1.4 According to the product height, decide the mold unloading stroke required for the machine and the latter should be bigger than the former.

1.5 Other minor factors should be taken into consideration:
(1) The mold thickness of the machine should fit for your mold height.
(2) Stroke of ejecting pin and ejection force.
(3) Technology factors.